| | |
|
| |
| | |
|
|
XL Parts
MSRP: $10.20
Maximum Price: $9.95
You Save: $0.25 (2 %)
Roll, Urethane Foam, Gray, Transport, Exit wheel.. 18 Durometer, 1.46 OD x .38 ID x .98 W. Used on XL, KT, KT2 and more
|
MSRP: $6.85
Maximum Price: $5.81
You Save: $1.04 (15 %)
Phototransistor, T-1, Narrow Angle, High Sensitivity, Modified Leads, Light Blue in color
|
MSRP: $59.88
Maximum Price: $50.81
You Save: $9.07 (15 %)
Gray, Roll Assembly, Friction Feed, for the Accufast XL labeler, FX Feeder, & Freehand Labeler, 1 roller
|
MSRP: $8.32
Maximum Price: $7.06
You Save: $1.26 (15 %)
Sensor LED, Infared, T-1, Narrow Angle, High Power, Modified Lead, Clear or Yellow in color, see notes..
|
MSRP: $11.83
Maximum Price: $10.04
You Save: $1.79 (15 %)
Bearing assembly commonly used on many for the Accufast products like the XL
|
MSRP: $186.00
Maximum Price: $175.00
You Save: $11.00 (6 %)
GRIT COATED LABEL DRIVE ROLL
|
The Accufast XL Operators Manual includes Helpful Hints and Trouble Shooting information
|
Full Take-Up Spool Assembly for serial numbers after 18474
|
MSRP: $21.00
Maximum Price: $17.83
You Save: $3.17 (15 %)
Transport Belt, Flat 1 1/2 inch wide, for Accufast XL, KT, TT
|
MSRP: $1.55
Maximum Price: $1.32
You Save: $0.23 (15 %)
Take up spool belt for an Accufast XL Labeler
|
FEED WEDGE FOR THE ACCUFAST XL LABELER
|
This heavy duty teflon tape, 02-0319-01, is used on the accufast XL labeling head's peel plate. And on the KT, QT, TT, TT2, on on peel plate.
|
Bump roller for the Accufast XL and FX
|
Head Motor for the Accufast XL Labeler 02-0884-00 Gearmotor, Permanent Magnet, 24VDC, 5.9:1, 690 RPM-NL, 175 ozin Max
|
Main Control Board for the Accufast XL labeler
|
Shaft for the Feed tires on the Accufast XL AFTER SERIAL NUMBER 183241
|
Power switch, On-Off, Rocker, SPST for the Accufast QT, KT, KT2, XL, P3, Freehand, P6, PM3
|
Used to align the XL labeler with an Accufast tabber like the KT or KT2
|
Used to align the XL labeler with an Accufast tabber like the KT or KT2, Slides back for easy access and jam removal without losing alignment.
|
Pulley Assembly, 20 Groove on Accufast XL transport
|
Knob Assembly, sensor cover, FOR THE ACCUFAST XL LABELER
|
Small belt on Accufast XL transport: Belt, 3mn HTD, 43 Groove
|
XL Pulley, 3mm HTD, 32 Groove, 6mm, used on the Accufast XL labeler feed roller shaft
|
MSRP: $98.28
Maximum Price: $68.85
You Save: $29.43 (30 %)
Used on the Accufast FX, Freehand Tabber, XL, KT2
|
Complete inner base assembly
|
| |
|
|
|