| | |
|
| |
| | |
|
|
FX Parts
MSRP: $16.95
Your Price: $9.00
You Save: $7.95 (47 %)
Clean and condition rubber feed rollers and extend the life of your rollers
|
Paper stop extension on the FX feeder.
|
Replaces the Gray or White, Roll Assembly, Friction Feed, for the Accufast XL labeler, FX Feeder, & Freehand Labeler, 1 roller
|
Gray, Roll Assembly, Friction Feed, for the Accufast XL labeler, FX Feeder, & Freehand Labeler, 1 roller *NO LONGER AVAILABLE! SEE options below
|
Transport and Feed Motor on the Accufast XL Labeler and FX Feeder
|
MSRP: $15.00
Your Price: $11.75
You Save: $3.25 (22 %)
Feed Wedge / elevator for the Accufast FX
Thumb screw is part #09-0536-00
|
MSRP: $168.00
Your Price: $147.00
You Save: $21.00 (13 %)
Roll Assembly, Friction Feed, Grooved, Blue / White, FX, XL, HDF
|
MSRP: $64.00
Your Price: $38.75
You Save: $25.25 (39 %)
Non Scratching separator for Accufast Feeders, price is for 1 ea
|
MSRP: $65.00
Your Price: $52.50
You Save: $12.50 (19 %)
BRUSH, STATIC, XL / FX / CHECK SIGNER
|
MSRP: $16.34
Your Price: $12.11
You Save: $4.23 (26 %)
02-1585-00 Finger guard
|
Bump roller for the Accufast XL,FX & Freehand Labeler This replacement is designed to resist melting.
|
MSRP: $36.00
Your Price: $29.63
You Save: $6.37 (18 %)
Bump roller for the Accufast XL,FX & Freehand Labeler
|
Accufast Knob Assembly used on the FX and XL
|
On/Off Switch, Push Button, FX03 feeder
|
XL Pulley, 3mm HTD, 32 Groove, 6mm, used on the Accufast XL labeler feed roller shaft
|
MSRP: $3.00
Your Price: $1.95
You Save: $1.05 (35 %)
Black hold down strip, on the Accufast KT, QT, TT2, Freehank Tabber
|
Side guide knob on Accufast XL labeler and FX Feeder
|
Used on the FX feeder, FX-03 Item 8 In Photo of IPG
Also on the Accufast XL Labeler Photo 2 Part 13
|
Belt for the Accufast FX feeder and Accufast XL Labeler
|
|
Item 17 in photo of IPG. Used on Accufast FX-03 All serial numbers
|
MSRP: $21.85
Your Price: $18.54
You Save: $3.31 (15 %)
|
Common Phillips head screw about 1/4 inch long on the XL,FX
|
The 1st series for the Accufast XL, FX, One, FDR use this wide version of the feed roller. Newer models use 2 separate rollers spaced apart.
|
02-1519-00 Accufast FX & XL, V Belt 6mm x 3mm x 305mm is Item number Part # 4 in the graphic
|
Motor Speed Control board for the Accufast FX feeder
|
Motor Speed Control board for the Accufast FX feeder
|
|
|
|
02-1566-00 Washer, Wave, .305 OD x .243 ID x .0066 Thick, .030 HI Stanless
|
|
Original text
Contribute a better translation
|
|