| | |
|
| |
| | |
|
|
Imager 2.5 - Neopost As-940
Part not listed? Click here to submit a lookup request!
This is a downloadable PDF Operators Instruction Manual for the Rena Envelope Imager 2.5
|
4 ea 20-108-13D DF FEED ROLLER, with screws and T-Handle Hex Key
|
MSRP: $29.95
Your Price: $26.97
You Save: $2.98 (10 %)
1 ea SEPARATION TIP, Common On many, ASTRO ,SECAP, NEOPOST ,HASLER, PITNEY BOWES
|
Common Small rubber tires
|
Replacement Printer Transport belt, 1 ea. Item 29 in graphic 1. You would need 11 to make a full set for a 2.5 and 8 on a Mach 6.
|
Replacement Printer Transport belt, Item 29 in the graphic. This is a complete set of 11 ea belts
|
Printer Transport belt, 1 ea. Item 29 in graphic. You would need 11 to make a full set.
|
MSRP: $29.95
Your Price: $17.36
You Save: $12.59 (42 %)
1 ea SEPARATION TIP, Common On many, ASTRO ,SECAP, NEOPOST ,HASLER, PITNEY BOWES
|
MAIN FEED TIRE WITH GATE TIPS (SET OF 4) FOR ASTRO, RENA, NEOPOST, HASLER INKJET MACHINES
|
MSRP: $85.75
Your Price: $67.95
You Save: $17.80 (21 %)
1 ea MAIN FEED TIRE includes Gate - Separator Tip, ASTRO, SECAP, NEOPOST, HASLER, PITNEY BOWES, RENA - NOT SET OF 4
|
New Split feed rollers, for machines like the Rena Imager 2.5 , 3.0 and 4.0
|
MSRP: $19.55
Your Price: $15.66
You Save: $3.89 (20 %)
1 ea SEPARATION TIP, Common On many, ASTRO ,SECAP, NEOPOST ,HASLER, PITNEY BOWES
|
Paper sensor for: Rena Imager 2.5, 1.5 and similar Hasler, Neopost and Astro printers. Item 48 in graphic with V shaped top
|
This wheel is very common on many Rena and Astro machines;
T-750 and T-950 registration assy , Easyfeed lite , Imager 1.5 , 2.5 , 3.0 , 4.0 , XT 3.0 . EICS
|
Commonly used to secure covers
|
Height Adjustment pot.on the 2.5 , 3.0 , 4.0 , XT-3.0 & XT-4.0
|
Small common wheel on the T-750/HT-20,T-650,T-950, Easyfeed lite I&II,Imager 2.5,3.0,4.0
|
|
clutch shaft on the Imager 2.5
|
Common bearing & cap for Rena & Astro products
|
MSRP: $32.75
Your Price: $19.95
You Save: $12.80 (39 %)
Connect your Addressing System / Envelope Printer to your USB port
|
|
|
Use as the rear feed rollers. We do not recommend using them as the front / main feed rollers
|
This high traction roller is not commonly used. See the full description for more information
|
|
|
MSRP: $1,350.00
Your Price: $1,005.35
You Save: $344.65 (26 %)
Common speed control board used in many Rena printers and tabbers
|
MSRP: $352.00
Your Price: $119.95
You Save: $232.05 (66 %)
Height adjustment POTENTIOMETER at servo motor. If your head assemble is jumping 99% of the time, this is the culprit.
|
MSRP: $12.00
Your Price: $7.50
You Save: $4.50 (38 %)
Non-flammable; high pressure spray - Compressed Air Cleaner. Safe to use on Sensors and all electronic energized equipment. Cleans with a burst of Air
|
USB Harness and connextor common on Astro, Rena, Neopost and Hasler units like the Rena 1.5, 1.5 Plus, 2.5, 3.0, 4.0, XPS ProMail 3.0 & 4.0
|
20-108-13D DF FEED ROLLER, 1-PC, Replaces 20-108-13, 2-pc Feed Roller Segment, no longer available
|
|
Original text
Contribute a better translation
|
|