Please NOTE there's a $60 minimum on the parts listed in this section! Orders under $60 could be delayed 4 to 8 weeks
MSRP: $246.40
Your Price: $181.17
You Save: $65.23 (26 %)
Item 47 in the graphic showing on a T-650 / TA-25
|
MSRP: $65.00
Your Price: $24.49
You Save: $40.51 (62 %)
Take up spool O-Ring for the Rena T650, T750, Hasler HT20, Neopost TA25, Astro 8900. We recommend that you replace both! (Part 14 in graphic)
|
Gear just above the encoder gear, on the exit roller assembly
|
MSRP: $182.94
Your Price: $134.51
You Save: $48.43 (26 %)
This plate alignment took makes it easy to properly align the tab guide place after you remove it for cleaning
|
Item 14.4 in the graphic is 41-101-08 EXIT ROLLER BOTTOM
|
|
For use in Rena T-650 Astro ATS-309 Formax FD282 Hasler HT-25 Neopost TA-25
|
Item 18 is 41-107-19 BELT WHEEL ASSEMBLY (w/o 41-107-18)
|
MSRP: $1,350.00
Your Price: $1,005.35
You Save: $344.65 (26 %)
Common speed control board used in many Rena printers and tabbers
|
|
|
Tab advance sandpaper roller for T-650 and T-750 and more, Item 16 in photo
|
MSRP: $206.90
Your Price: $152.12
You Save: $54.78 (26 %)
Number 13.1 in graphic shown on a T-650, also used on the T-750
|
|
|
123-1540A - SWITCH, GREEN PUSHBUTTON WITH INTEGRATED CONTACT BLOCK [A] (Replaces [B] old 123-1540A Switch and 123-1981 Contact Block Old Style Switch No Longer Available. See illustrations below)(Lamp available separately, see Key 19)
|
|
Used on the Rena Quadient XPS ProTab 4.0, T-950, T-750, T-650, Astro ATS 9950, ATS 9900, 8900, ATS-309, Neopost TA-30, TA20, TA-25, Hasler HT-30, HT-20, HT-25, Pitney W360, Formax FD 282
|
|
|
MSRP: $58.94
Your Price: $43.34
You Save: $15.60 (26 %)
Knob for the TAB SEPARATOR BRACKET ASSEMBLY
|
MSRP: $65.00
Your Price: $24.00
You Save: $41.00 (63 %)
Used on ATS-309, ATS-8900, TA-25, TA.20, T-650, T-750, HT-25, HT-20 W360, FD-282
|
Truss Head , 4-40 X 3/16 PHILLIPS SS NISL # A0003099Common screw on Rena and Astro products
|
Media Sensor for Rena T-650, Neopost TA-25, Hasler HT-25, Astro ATS-309, Pitney Bowes W360 Item 17 in graphic
|
Item 46 in 1st graphic, Item 32 in 2nd graphic
|
Used on the Rena T-650, Hasler HT-25, Neopost TA-25, Astro ATS-309, Pitney W360, Formax FD 282
|
Item 48 in the 1st graphic - 41-500-79 BRAKE ASSEMBLY, HEAD 1Item 35 in the 2nd graphic
|
The motor is item 30 in the graphic
|
Item 12 in the graphic is 41-108-17 BELT SUPPORT STUD #4 ASSEMBLY
|
Item 13 in the graphic is 41-108-19 BELT SUPPORT STUD #2 ASSEMBLY
|
Item 14 in the graphic is 41-108-20 BELT SUPPORT STUD #3 ASSEMBLY
|
Item 15 is 41-108-22 BELT SUPPORT STUD #1 ASSEMBLY
|